As the name suggests, this new formula incorporates SiC (Silicon Carbide) for added chemical resistance.

We have also greatly improved the ease of use, resistance to water spotting and even amped up the gloss and depth! Finally, the ridiculous level of slickness will leave you thrilled with the results.

Features:

• Acid and alkyl chemical resistance from 2 ~ 13 pH.
• Better water spots and minerals resistance.
• Highly smooth feeling.
• Deep gloss.
• Very easy application in any temperature

Directions: Use only in good ambient lighting

1. Warning! : Contents under pressure. Do not shake. Open slowly. Aim away from face and others and wear gloves when opening.
2. Wrap a 4″ microfiber suede around the grey side of applicator block.
3. DO NOT SHAKE. Slowly open bottle and drag one line of product down the applicator.
4. Spread across paint in a criss cross pattern approximately 2 sq ft at a time depending on conditions.
5. Buff off about 5 minutes later once it looks less wet but is not yet difficult to wipe. (3~15 minutes depending on temperature and air movement) – see additional tips below) using a CARPRO No Lint Ultra Towel 16″ x 16″.
6. Be sure to remove all excess residue when wiping off.
7. Switch out the 4″ Suedes every 2+/- panels.
8. Additional coats may be applied with 45-60 minutes or wait until the following day if you are beyond 90 minutes.  CARPRO recommends 2 coats. You may apply additional coats if you wish.
9. Do NOT top with Reload during initial installation.  Reload can damage SIC if used in the first few days.  SiC is very slick on is own and in fact more slick then Reload.